Rational MI 2048, Modification Instruction

Page: 4 / 104

1 | MI_2048: Change heat exchanger
4 / 104 MI_2048_Change heat exchanger_S
MI_2048_Change heat exchanger_S
5. Remove the cover.
6. Carefully loosen the top panel by hand. Place a piece of cardboard in the
door gap at the top. Remove the door hinge plate on the unit top panel.
Carefully remove the unit top panel.
>
The piece of cardboard prevents the build up of pressure points.
7. Fasten the door holding plate without the unit top panel.
>
The door holding plate must be screwed on tightly again, because other-
wise the door cannot be attached and opened.
8. Carefully remove the air baffle. To remove the air baffle, hold it at a slight
angle. Incorrect removal may damage the inner tray.
9. Remove the heat exchanger. To do this, tilt the heat exchanger like the air
baffle. With floor units, the heat exchangers must be removed from top to
bottom.