Rational iVario Pro L, Original Installation Manual

Page: 48 / 72

8 | Water connection
48 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
8.2 Connecting water inlet
The water connection is on the rear of the unit.
1
2
1 Cold water connection
2 Hot water connection (optional)
a
The water hose meets the hygiene requirements for drinking water hoses
in your country.
a
Line for shared cold water connection: 3/4 Inch
a
The water hardness is at least 4°dH.
1. Connect the supplied water hose to the water inlet of the unit.
2. If the unit is equipped with the hot water option, connect the water inlet to
the hot water connection.
3. If the unit is equipped with a hot water connection but is not connected,
make sure you screw the connection with the supplied gasket 1 and cap 2.
1
2
4. Open the water tap.
>>
The water inlet is connected.