23
noise inFoRmation
vibRation inFoRmation
A weighted sound pressure
L
pA
: 87.5dB(A)
A weighted sound power
L
wA
: 98.5dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value a
h
,HD = 10.77m/s
2
Uncertainty K = 1.5m/s²
WArNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WArNING:
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Rated voltage
230V~50Hz
Rated power
400W
Rated no load speed
0-1500/min
Impact frequency
0-6600BPM
Rated impact energy
1.0J
Chuck type
SDS+
Drilling capacity max
Steel
10mm
masonry,
10mm
wood
30mm
Protection class
/II
Weight
1.3kg
tecHnicaL data
Type
ML400M (PDH--designation of machinery, representative of rotary Hammer)
