Ratio AR1050NM, Instruction Manual

Page: 34 / 48

34
TECHNICAL DATA
Type AR1050NM (PGA-designation of machinery, representative of Angle Grinder)
Voltage 230-240 V~50 Hz
Power input 1050 W
Rated speed 11000 /min
Disc size 125 mm
Disc bore 22.23 mm
Spindle thread M14
Protection class
/II
Machine weight
2.4 kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 100 dB(A)
A weighted sound power L
wA
: 111 dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Surface grinding
Vibration emission value a
h AG
= 6.1 m/s
2
Uncertainty K = 1.5 m/s²
– the declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
– the declared vibration total value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.