Ratio Electric 37632, Manual

Page: 27 / 52

SMART BOX / EV050
ENGLISH 27
MANUAL
You can set the charging current between 6A and
32A (you can adjust the charging current during
charging)
FIXED 16
With this option you can set the charging current to
16A
FIXED 32
With this option you can set the charging current to
32A
SMART
Load Balancing mode
– the EV will charge with a
dynamic charge current, depending on Sensorbox
data and I-MAX HOME, I-MIN and I-MAX settings
You can change the setup by pressing the left or right arrow button. After your
choice has been made confirm by pressing the middle button.
2 LOAD BAL
It is possible to connect up to 4 Smart Box modules to each other and let them
share one mains supply. Configure the Smart Box
’ s load balancing option (LOAD
BAL) and set one module to MASTER, the others to SLAVE 1,2,3.
Make sure there is only one Master, and the Slave numbers are unique. Example:
for two units set the first module to Master and second to Slave 1.
ATTENTION! When you are using one Smart Box, it must be set to Master.
DISABLED – no load balancing is used
MASTER – set one of the Smart Box’s to Master
SLAVE 1-3 – set the rest of the Smart Box’s to Slave 1 -3, when using load
balancing
SETUP
<- LOAD BAL ->