background image

Thank you for purchasing RATH’s 2100-986DA(I). We are the largest Emergency Communication 

Manufacturer in North America and have been in business for over 35 years. 

We take great pride in our products, service, and support. Our Emergency Products are of the highest 

quality. Our experienced customer support teams are available to remotely assist with site preparation, 

installation, and maintenance. It is our sincere hope that your experience with us has and will continue 

to surpass your expectations. 

Thank you for your business,

The RATH

®

 Team

N56W24720 N. Corporate Circle    Sussex, WI 53089

800-451-1460    www.rathcommunications.com

Table of Contents

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
2100-986DA Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . 
Phone Programming . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . .
2100-986DAI Wiring . . . . . . . . . . . . . . . . . . . . . . . . . .    
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Page 3
Page 4 
Page 4-5
Page 5
Page 6
Page 7

Summary of Contents for 2100-986DA








Reviews: