3
https://www.rasor-cutters.com/it/
GENERAL INFORMATION
1 GENERAL INFORMATION
1.1
Important safety information
1.1.1
General warnings
–
The product user must store the following instructions care-
fully and follow them closely, as improper use of the device
can harm people or damage the product or property, ex-
empting
Elettromeccanica S.r.l.
from any liability.
–
The following instructions must be kept with the product to
which they refer and be stored in a place where users can
access and view them.
–
Reproduction, in whole or in part, of the illustra-
tions or text given in these instructions is prohibited.
Rasor Elettromeccanica S.r.l.
reserves the right to amend
the documentation without prior notice.
a
CAUTION HAZARD
–
The product must be started and used solely in
compliance with all safety guidelines given in these
instructions.
–
Failure to follow these instructions, or any product
alteration not carried out by our authorised technicians,
will void the warranty and relieve the manufacturer of
any liability arising from harm to people, damage to
property or to the product itself.
a
CAUTION HAZARD
–
Check that electrical and mechanical parts are in
excellent working order before starting the device.
–
Children must not play with the product.
–
Cleaning and maintenance intended to be carried out
by the user must not be carried out by unsupervised
children.
–
Use only original spare parts supplied by
Rasor
Elettromeccanica S.r.l.
–
Any required operation (maintenance or repair) must be
carried out by qualified personnel after having cut the
power supply, thus preventing accidental start-up which
could cause harm to people or property. Switching the
product off is not sufficient.
–
Users must follow the accident-prevention regulations in
force in their country and must use adequate protection
when using and maintaining the product.
a
CAUTION HAZARD
–
It is particularly important to keep the product out of
reach of children and pets.
–
The product must be used indoors, away from heat, wet
and humidity.
–
The product must be cleaned solely with a dry cloth,
after having disconnected it from the power source.
–
During normal work operations, do not wear loose-
fitting clothing or accessories that may be a source of
risk.
–
Wear metal mesh safety gloves and safety goggles
during the normal work cycle.
–
Materials must be perfectly dry when using the product.
