Rasonic RWH-CT5, Installation And Operating Instructions Manual

Page: 4 / 20

4
SAFETY GUIDELINE
● Installation, commissioning and maintenance of this appliance may only be undertaken by an
authorized technician who will then be responsible for adhering to the applicable standards
and/or installation regulations.
● All spare parts provided by the manufacturer must be duly installed. We are not liable for
any damages caused by non-compliance with these instructions.
● Sole Distributor will not provide warranty service on any product installed with unauthorized
components or devices.
** WARNING ** : The appliance must be EARTHED .
● The appliance may only be used when correctly installed by authorized technician and in
good working order.
● The appliance must be completely filled with water and air bubbles released inside the water
tank before being switched on.
● The spare parts provided by the manufacturer must be installed and its wiring and piping must
not be modified in any way. The hot water outlet and fittings may be very hot! Keep away from
children.
● Subject to local Electrical Laws and Regulations, one of the followings may be provided
(Provision and fixation by client):
i. miniature circuit breaker (MCB)
ii. earth-leakage circuit breaker (ELCB)
● It is normal if water drips from the Temperature and Pressure Relief Valve (P&T Valve) while
the water is being heated.
● The maintenance access panel of the appliance must never be opened before disconnecting the
appliance from the main power supply.
● Do not switch on if there is a possibility that the water in the heater is frozen.
● The water inlet of this appliance shall not be connected to water inlet of any other water heating
systems.
● Do not allow children to play or touch with the water heater, guardian need to supervise children,
to prevent the electrical shock or any injuries.
● This appliance is not intended to be operated by children or disabled persons alone.
They must be supervised by adults who are responsible for their safety.
● This appliance is not to be used for a potable water supply.
● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
authorized technician in order to avoid a hazard.
● Check water temperature before use, the shower head should always be pointed away from
human before cold water is turned on. After use, turn the mixer to cold arrow and shut off.
● Disconnect the power supply if the appliance is idle for a prolonged period.
The initial operation procedures must be carried out before reuse.