– 12 –
6. Make sure the lid is closed tightly to prevent water from splashing
out or steam discharging; otherwise, the appliance may not
function properly or cause hazards.
7.
WARNING!
Do not open the lid during operation or right after
use, as massive steam will come out from the steam vent, only by
doing so can prevent steam burn.
8. Do not open the lid during operation, otherwise boiled water
may spill out and cause burns. If necessary, press
【
Keep Warm/
Cancel
】
button to switch off the appliance before open the lid.
Be careful of the hot steam and droplets when open the lid.
9. After cooking, a lot of vapour and water droplets will remain inside
the main unit and lid, which is a normal phenomenon. To avoid
burns, switch off the appliance and unplug the power, wait for a
while before opening the lid to avoid burn by residue heat. Open
the lid carefully to avoid condensed water droplets from the lid
drop onto the control panel or power cord. To avoid scalding by
hot steam, use oven mitts to pick up the food from the appliance.
10. Always use kitchen utensils with long handles when checking the
food inside. Beware of hot steam, do not operate the appliance
next to wall or furniture.
11. Do not switch on the appliance when there is no water in the
water tank. If boil dry occurred, add water into the water tank or
unplug the power.
12. Do not open the lid, move or shake the appliance during operation
as to avoid massive steam emission resulting in burns or other
hazards.
13. To avoid appliance malfunction, deformation or discoloration, do
not cover the appliance or steam vent by any object when using
the appliance.
1.3 After use
1. Normally cleaned after use, unplug the appliance from the socket
and let the appliance cool down before moving and cleaning.
2. To avoid getting burned, never touch the appliance enclosure and
heating plate which are subject to residual heat right after use.
3. To avoid affecting the safety performance and prevent electric
shock and fire, never immerse the main body, power cord or plug
in water or let them wet. Make sure the plug is dry before use.
