嵌
入
式
蒸
氣
焗
爐
Built-in
Steam
Grill
Oven
– 34 –
– 35 –
6.6.1 Application of Sterilization/Ferment/Keep warm/Defrost functions
User can follow the below procedures to setup: Select cooking functions->Setting operation time>Setting operation
temperature->Operation starts
Under selection mode, press Mode [ ] key to select different auxiliary functions in order. Or, user can press Increase
[ ] or Decrease [ ] key to choose in cycle. Corresponding icon will blink on display for selected function, and
default cooking temperature and time will be shown on display. Once selected, press Temp./Time [
] key once,
operation time indicators will start to blink.
Press Increase [ ] or Decrease [ ] key to set desire operation time. Press and hold can access quick adjustment
(Increase or decrease by 10 minutes each time). Once finish, press Temp./Time [
] key again, operation temperature
indicators will start to blink.
Press Increase [ ] or Decrease [ ] key to set desire operation temperature. Press and hold can access quick
adjustment. Once finish, press Start/pause [
] once to confirm, the appliance will start to operate.
Note: The operation temperature of Sterilization and Defrost functions
CANNOT
be adjusted.
6.6.2 Application of Descaling function
After using for a period of time, in order to avoid the accumulation of scale in the evaporator and pipes, which will
affect the performance of STEAM or STEAM GRILL functions. The appliance will remind user to operate descaling
function after the above 2 category cooking functions have accumulated 50 working hours (accumulated under
electricity connected). The Descaling indicator ( ) will light up. If user does not operate the descaling function,
the above said functions will not operate. Procedures are as follow.
1.
Fill the water tank with clean water and descaling agent. (Taking citric acid as a descaling agent as an example,
add 20g citric acid into 1 liter water.)
2.
Under selection mode, press the Mode [ ] key to select Descaling function, and the ( ) icon will flash. Press
the Start/pause [
] key to confirm, “C01” will be shown on the display. Press the Start/pause [
] key to
start the first stage of descaling function.
3.
When the first stage of descaling function is completed, the appliance will automatically change to the second
stage and“C02” will be shown in the display. User must empty the tank and refill with clean water. Then, put
it back into the appliance and press Start/pause [
] key to start the second stage of descaling function.
4.
The entire descaling function can be divided into 3 sections (including water filling, soaking and boiling) and 2
cycles. The first cycle will be completed in about 25 minutes while the second cycle will be started immediately
until the entire descaling function is completed. The entire descaling function takes about 60 minutes.
5. After completion, the buzzer will sound and the display will show “End” representing that the descaling
function has been completed. Empty the remaining water in the water tank.
Note:
•
The operating time of the two stages descaling function will be slightly different in accordance to the actual
situation and condition of the appliance.
•
Open the oven door to dissipate heat (ATTENTION! High temperature steam), after the appliance is cooled
down completely, clean and wipe the water in the cavity with a damp cloth. The appliance can be used again.
