嵌
入
式
蒸
氣
焗
爐
Built-in
Steam
Grill
Oven
– 24 –
– 25 –
2. Installation Instructions
The appliance complies with the safety requirements. The following notices for installation must
be observed when using. Failure to comply with the installation instructions or caused damage
to the appliance, manufacturers and distributors would not take any responsibility.
To prevent fire, burns and electric shock, observe the following before usage:
1. The appliance is high power consumption, use a separate power socket, and should not share
a power socket with other electrical appliances. Ensure that the input voltage specified on
rating label is consistent with the local voltage.
2. Make sure that the power cord and electricity supply are connected firmly; otherwise
overheating of power cord due to poor contact will affect the function of the appliance, and
speed up the damage of the appliance or cause fire and other hazards.
3. In the case of fixed electrical installation, get qualified technical personnel to perform.
4. Make sure the appliance is under good ventilation when using. Avoid overheating by blocking
the ventilation holes of the steam grill oven. Do not place anything on top of the product
and insert metal objects (such as needles or wire, etc.) into the product, inside the gap or
vapor outlet.
5. Place the appliance in ventilating environment without corrosive gas, fire, high temperature,
strong magnetic, vapor, moisture, fumes or contact with flammable materials.
IMPORTANT NOTE
The supplied wires in the mains lead are colored in accordance with the following code:
Earth: Green and Yellow
Neutral: Blue
Live: Brown
As the colors of the wires in the mains lead of the appliance may not correspond with the colored markings
identifying the terminals in the power socket, proceed as follows:
•
The wire which is colored green and yellow must be connected to the terminal in the socket which is marked
by the letter E or by the safety earth symbol
or colored green or green and yellow.
•
The wire which is colored blue must be connected to the terminal in the socket which is marked with letter
N or colored black.
•
The wire which is colored brown must be connected to the terminal in the socket which is marked with
letter L or colored red.
Note: Replacement or installation of the power socket shall be performed only by authorized/qualified personnel.
Product dimension
Note: Unit in below picture is in millimeter (mm)
