22
6. Do not set the preset function for too long time to avoid food deterioration and cause bad
smell. User can set a proper time for the preset function according to the room temperature
and the deterioration of food.
5.4 Slow stew function (This function is not applicable to preset function.)
1. In the stand-by mode, press
【•
Slow Stew
】•
key.
2. After set, press
【• •】
or
【• •】•
key can set the slow stew cooking time, each adjustment is
5 mins., press and hold
【• •】
or
【• •】•
key can have quick adjustment, each adjustment is 30 mins.
3. After set, press
【•
Start / Cancel
】•
key to start the function.
5.5 Lid Open Cook (This function is not applicable to preset function.)
1. This function must be operated when the lid is opened.
2. Press
【•
Lid Open Cook
】
key, then press
【• •】
or
【• •】•
key can set the cooking time, each
adjustment is 1 min.
3. After set, press
【•
Start / Cancel
】•
key to start heating the food.
5.6 Cancel key
During operation, press
【•
Start / Cancel
】•
key to cancel the function, the appliance will have a
beep sound and the display screen shows 00:00, the appliance will return to the stand-by mode.
5.7 Using tips
1. If over 60 seconds without setting, the appliance will have a beep sound and the display screen
shows 00:00, the appliance will return to the stand-by mode.
2. At the beginning of use, some small debris may be found in the middle frame of the appliance,
which is caused by the grinding of the metal part of lid and the outer pot, which will not affect
the normal use.
3. The cooked rice texture is varied with difference rice amount, water volume and rice quality,
sometimes it is possible to form crust.
4. Beans require to be soaked in warm water before cooking.
6. Troubleshooting
Problem
Cause
Solution
The lid cannot open.
The safety lock is not pulled
out.
Pull out the safety lock, turn the lid
clockwise to the open position, then
lift up the lid.
The float valve is stuck
by the viscous substances
and cannot fall down
automatically.
Wait for 35 minutes after cooking, turn
the pressure limit valve to exhaust. If the
float valve still does not fall, use a slender
object such as chopsticks to press down.
Pressure is not exhausted
completely.
Waiting for the pressure exhausted
completely, then the lid can be opened.
Difficult to close the lid.
Forget to pull out the safety
lock or the lid position is not
correct.
Pull out the safety lock, align the O mark
on the lid to the open position on the
main body to land the lid, and then turn
it counter clockwise to reach the close
position to close the lid.
The sealing ring of the lid is
not installed well.
Install the sealing ring again.
Summary of Contents for RPC-J21
Page 26: ......
