Rasonic RGS-B10PW, Operation Manual

Page: 15 / 24

RGS-B10PW
/ RGS-B12MW
手
提
蒸
氣
掛
熨
機
Handheld
Garment
Steamer
– 13 –
2. Maintenance, Cleaning and Storage
2.1 Product maintenance
Remove water scale
Since water in different areas contains different amounts of
minerals, some areas may contain a higher mineral contents in
water. Mineral buildup is a common phenomenon for garment
steamers. Mineral residue inside the steam hose and heater can
cause intermittent steam, or in some cases no steam at all. It is
recommended to remove the mineral build-up every month
according to below procedures:
1. Before maintenance, remove the plug from the power socket.
2. Let the appliance cool down, drain all the water from the
water tank.
3. Mix a solution of 50% vinegar and 50% water (capacity is
around 80 ml). Slowly pour the water vinegar solution into
the water tank.
4. Turn on the steam mode of appliance for 5-6 minutes, then
turn it off.
5. Allow the appliance to cool down for approximately 30
minutes. Remove the drain plug and drain the solution from
the water tank.
6. Fill clean water into the water tank, then drain off. Repeat
this step until the vinegar smell disappears. Cover the drain
plug back.
7. Reassemble the appliance with water tank before use again.