27
1.
Align the center of one microfiber pad with the center of the mopping plate, press the pad down
to attach, as shown in Fig. 1.
2.
Make sure the microfiber pads are well-installed. If the pads do not attach to the mopping tray
properly, it will affect the operation and reduce the operation time.
3.
To use the disposal pads, you must attach the hoop & loop pads on the mopping plate first, then
attach the disposal pads on it.
6.
Operation Instructions
6.1 Application of water tank
The appliance is equipped with water spray function, helping to humidify the floor and assist in
cleaning floor. To apply, fill clean water into the water tank of the mopping head before use. Steps
are as follow,
1.
Lift the water tank cover.
2.
Make sure to use a measuring cup to fill water. (The water tank capacity is 150ml.
DO NOT
exceed the maximum water level.)
3.
After filled, make sure to put back the cover to close the water inlet. If there is an overflow of
water, wipe it immediately to avoid malfunction.
ATTENTION! Do not inject tap water directly to avoid malfunction.
