background image

Also available for
built-in installations
only is this compact,
functional 24” unit.

Part# SOL-IRDT-24

Solaire Bartending Centers

Wood Chip Smoker

Add great wood smoke flavor to all
your grilled foods with this all 304
stainless steel Smoke Drawer. Fits
under grilling grate. 

Part# SOL-IRWS-BQ

Solaire Grill Accessories

BBQ Tray

A great addition to your grill for
rotisserie cooking or anytime more
subtle, diffuse heat is desired. All
304 stainless steel. 

Part# SOL-IRBT-BQ

Steamer/Fryer

Talk about versatility! Imagine fresh
steamed lobster, clams, french fries
and tempura vegetables cooking
right along side of your favorite cuts
of meat. Includes steaming insert
and fry basket. 

Part# SOL-IRSF-BQ

Food Warmer

For the ultimate in serving
convenience, add our
Food Warmer to your cart
model grill or Bartending
Center. Includes Sterno
drawer.

Part# SOL-IRFW

Nothing completes a perfect outdoor meal better than a nice, cold
drink. Prepare them in style with a Solaire Bartending Center. Have
all the features that professional bartenders demand right at your
fingertips with one of these all 304 series stainless steel units
designed to integrate perfectly with your Solaire grill.

Insulated ice compartment, bottle storage rail, bottle
opener with cap catcher and chilled bottle bins

Sink with drainboard and cutting board

Optional serving shelf (shown)
and condiment tray

36” model shown available on
cart or for built-in installations

Built-in # SOL-IRDT-36   Cart # SOL-IRDT-36C

42” cart model available
with refrigerated base cabinet

Cart with Refrigerator # SOL-IRDT-42RBC

Summary of Contents for Solaire





























Reviews: