background image

Rasha Professional A/S 375 W Esplanade Ave. San Jacinto, CA 92583 

951-654-3585

rashaprofessional .com 

|

 [email protected]  Rev. 101615

5

•  To reduce the risk of electrical shock or fire, do not expose this unit rain or 

moisture.

•  Do not attempt to operate this unit if the power cord has been frayed or 

broken. 

•  Do not attempt to remove or break off the ground prong from the electrical 

cord. This prong is used to reduce the risk of electrical shock and fire in 

case of an internal short.

•  Disconnect from main power before making any type of connection.

•  Do not remove the cover under any conditions. This will Void your 

Warranyt 

•  Never operate this unit when it’s cover is removed.

•  Never plug this unit in to a dimmer pack

•  Always be sure to mount fixture in well ventilated area. (Allow about 6” or 

15cm between this device and a wall.

•  Do not attempt to operate this unit if it becomes damaged.

•  This unit is intended for indoor use only, use of this product outdoors voids 

all warranties.

•  During long periods of non-use, disconnect the unit’s main power.

•  Always mount this unit in safe and stable matter.

•  Power-supply cords should be routed so that they are not likely to be 

walked on or pinched by items placed upon or against them, paying 

particular attention to the point they exit from the unit.  

Cleaning

 

•  The fixture should be cleaned only as recommended by the manufacturer.  

Heat

•  Fixture should be away from heat sources (including amplifiers) that 

produce heat. 

The fixture should be serviced by qualified service personnel when:

 

1.  The power-supply cord or the plug has been damaged. 

2.  Objects have fallen, or liquid has been spilled into the appliance. 

3.  The fixture has been exposed to rain or water. 

4.  The fixture des not appear to operate normally or exhibits a marked 

change in performance.

Safety Precautions

Summary of Contents for HEX V12 Wireless
















Reviews: