2
Super Lube
®
is a registered trademark of Synco Chemical Corp.
OPERA
TION\CLEANING
OPERATION
WARNING: DO NOT adjust valve handle (1209BW)
while toilet is operating.
1. With valve handle in the "FLUSH" position pumping
the handle will draw water in and discharge the bowl
contents.
2. With valve handle in the "DRY" position pumping
the handle will only discharge the bowl contents
while drawing air in through the air valve assembly
to prevent a build-up of pressure.
• We reccomend single ply toilet paper.
• Water should appear in the bowl within ten seconds.
If not, see troubleshooting section.
• Hard objects or stringy substances (paper towels,
feminine hygiene products, filter cigarettes, etc.) must
not be thrown into the toilet as they will cause damage.
• Always shut off seacock(s) before leaving the boat
unattended.
Cleaning Instructions
IMPORTANT: Do not use cleaners that contain
ammonia, ethyl acetate, phosphoric acid or
concentrated chlorine bleach. These may cause
damage to the toilet.
Using C.P. a bio-enzymatic toilet bowl cleaner (1PCP22)
will keep the bowl clean and fresh smelling.
Recommend Visual Inspection
For leaks at toilet and hose connections
Hose clamps
Condition of hoses
Seacocks
Condition of wires and connections
In-Line Strainer (if you have one)
MAINTENANCE
Super Lube
®
(#SL1CC) applied to the piston rod will
prolong the life of the Piston Shaft Seal. This should be
done every spring and fall or more regularly if the head
is used frequently. Applying Super Lube to all moving
parts is also recommended.
Installtion of a Knocks Out Odor Kit (#KO2) will reduce
the "rotten egg" smell associated with using salt or brackish
water to flush the toilet.
Position for intake
of water and
discharge of bowl
contents
Position for
discharge of bowl
contents only (no
water coming in)
Valve handle must be
fully
in the
"FLUSH" or "DRY" position only.
C.P
.
L563 0316kgs