Configuring the Base MasterConsole II
(Two-Tier)
The Configuration Menu is used to specify your base MasterConsole II
configuration and to set/change parameters for operation.
See Figure 14
1.
Activate
On-Screen User Interface
by pressing the hot-key
(
<Scroll-Lock>
by default) twice rapidly.
2.
Press
<F4>
to access the
Configuration Menu.
·
The
Connected
field displays the Channel ID and Name of the
currently selected computer.
·
The
Model
field displays the model number of this
MasterConsole unit (MCCn).
3.
Use the
<Tab>
(forward)
/<Shift-Tab>
(backward) keys to select
the desired field and make your change as follows:
·
To change
Name
(default is the unit's model number): Move to
Name and type a name up to five characters. This field is used-
for your identification purposes only.
·
The
Device
field specifies the type of device computer or
19
Configuration Menu
Connected: 01 PC0001
Model: MCC8 Name: MCC8
Device: . . . . . . .
Scan: Off Set: 15 Seconds
Mode: Global
Skip: On
ID Display: 20 Seconds
Hot Key: Scroll Lock
Display Position: Menu ID
Green Mode: Off 15 Minutes
Previous Channel Key: CapsLck
F1 F2 F3 F4 F5 F6 F7 Esc
Figure 14.
Configuration Menu (Two-Tier)
