2.
Press
<F4>
to access the Configuration Menu.
See Figure 8
.
·
The
Connected
field displays the Channel ID and Name of the
currently selected computer.
·
The
Model
field displays the model number of this
MasterConsole unit.
3.
Use the
<Tab>
(forward)
/<Shift-Tab>
(backward) keys to
highlight the desired field and make your changes as follows:
·
To change
Name
(default is the unit’s model number): Move to
Name
and type a name up to five characters. This field is used
for your identification purposes only.
·
The
Device
field specifies the type of device connected to each
channel. The default character is ".", which indicates that the
device is a computer. In a one-tier configuration, only a comput-
er may be connected to each channel. The Device field settings
may be changed when expanding to a two-tier configuration.
See Figure 15,
page 19 for two-tier device type settings.
·
To turn AutoScan ON/OFF (default is OFF)
:
Move to Scan and
press the
<
Ï
>
/
<
Ð
>
keys to toggle. If you exit On-Screen User
Interface with AutoScan ON, MasterConsole II will scan according
to the currently set mode (Individual/Global) and scan rate.
a.
a. To change the
Global Scan Rate
(default is 3 sec-
onds): Move to
Set
and type a number from 01 to 99,
or press the
<
Ï
>
/
<
Ð
>
keys to specify the Scan Rate
(in seconds) for Global AutoScan.
b.
To change AutoScan mode (default setting is
Global): Move to Mode and press the
<
Ï
>
/
<
Ð
>
keys
to toggle between
Global
and
Individual
. See page
34 for description.
·
To turn
AutoSkip ON/OFF
(default is OFF): Move to
Skip
and
press the
<
Ï
>
/
<
Ð
>
keys to toggle. With AutoSkip ON, only
active channels can be selected.
·
To change the
ID Display time interval
(default is 3 seconds):
Move to
ID Display
and type a number from 01 to 99, or press
the
<
Ï
>
/
<
Ð
>
keys to specify the interval (in seconds) you want
the Channel ID and Name to display when each computer is
selected. Type
99
if you want the Channel ID and Name to dis-
play continuously.
·
To change the
On-Screen User Interface
activator (default is
<Scroll Lock>
): Move to
Hot Key
and press the
<
Ï
>
/
<
Ð
>
keys
to select the desired key. The hot-key can only be
<ScrollLock> <NumLock>
,
<CapsLock>, left <Shift> or left
7
