C
HAPTER
4:
R
EMOTE
M
ANAGEMENT AND
O
PERATION
33
Vertical Frequency (Hz):
The vertical (refresh) frequency in Hz.
Total horizontal pixels:
The total amount of pixels per line, including the non-visible and
blanking area.
Polarity:
The polarity (positive/negative) of the synchronization signals (V is vertical, H is
horizontal).
Description:
Provide a mode name that will appear in the Remote Console when this custom
mode is activated.
Click
Apply
to apply your changes.
KVM Ports
Figure 29 KVM Port Settings Screen
In the
Active KVM Port
panel, click on the Active Port drop-down arrow and choose a KVM
port from the list.
Click
Switch
to activate the KVM port.
In the
KVM Port Settings
panel, specify the settings for each port.
Nr:
The number of the port.
Name:
The name or a description of the computer/network that is accessible using this port.
Show in Console:
If checked, the port name, above, will be visible in the Remote Console.
Click
Apply
to apply your changes.
Summary of Contents for MasterConsole IP MCIP116
