Raritan Home Security System, User Manual, Page: 332 / 384

Appendix B: CC-SG and Network Configuration
314
Port Number Protocol Purpose Details
Raritan device that will be
externally accessed. The other
ports in the table must be opened
only for accessing CC-SG.
AES-128/AES-256 encrypted if
configured.
80 and 443 for Control
System nodes
80, 443, 902, and 903 for
Virtual Host and Virtual
Machine Nodes
TCP Virtual Node Access N/A
51000 TCP SX Target Access (Direct
Mode) AES-128/AES-256 encrypted if
configured.
Possible exceptions to the required open ports:
Port 80 can be closed if all access to the CC-SG is via HTTPS
addresses.
Ports 5000 and 51000 can be closed if CC-SG Proxy mode is used for
connections from the firewall.
CC-SG Communication Channels
Each communication channel is documented. For each communication
channel, the table includes:
•
The symbolic IP Addresses used by the communicating parties.
These addresses must be allowed over any communication path
between the entities.
•
The Direction in which the communication is initiated. This may be
important for your particular site policies. For a given CC-SG role,
the path between the corresponding communicating parties must be
available and for any alternate re-route paths that might be used in
the case of a network outage.
•
The Port Number and Protocol used by CC-SG.
•
Whether the port is Configurable, which means the Admin Client or
Diagnostic Console provides a field where you can change the port
number to a different value from the default listed if there are
conflicts with other applications on the network or for security
reasons.
•
Details about the method of communication, the message that is
passed via the communication channel, or its encryption.