Raritan Home Security System, User Manual, Page: 277 / 384

Chapter 15: Advanced Administration
259
2. Connect to the device by typing
ssh -id <device_id>
.
Using the figure above as an example, you can connect to SX-229
by typing
ssh -id 1370
.
Use SSH to Connect to a Node via a Serial Out-of-Band Interface
You can use SSH to connect to a node through its associated serial out-
of-band interface. The SSH connection is in proxy mode.
1. Type
listinterfaces
to view the node ids and associated
interfaces.
2. Type
connect -i <interface_id>
to connect to the node
associated with the interface.
3. At the prompt that appears, you can enter specific commands or
aliases.
Command Alias Description
quit q Terminates connection and returns to SSH
prompt.