Raritan Home Security System, User Manual, Page: 275 / 384

Chapter 15: Advanced Administration
257
To restart a device:
restartdevice <[-id <device_id>] | [host]>
To restore a device configuration:
restoredevice <[-host <host>] | [-id <device_id>]>
[backup_id]
To shutdown CC-SG:
shutdowncc minutes [message]
To open an SSH connection to an SX device:
ssh [-e <escape_char>] <[-id <device_id>] | [host]>
To change a user:
su [-u <user_name>]
To upgrade a device's firmware:
upgradedevice <[-id <device_id>] | [host]>
To list all current users:
userlist
To exit the SSH session:
exit
Command Tips
•
For commands that pass an IP address, such as
upgradedevice,
you can substitute the hostname for an IP address. See
Terminology/Acronyms (on page 2) for hostname rules.
•
The
copydevice
and
restartdevice
commands apply only to
some Raritan devices. Dominion SX and IPMI servers are not
supported by these commands.
•
Parts of a command in square brackets are optional. You do not
have to use that part of the command.
•
Some commands contains two segments separated by the "Or" sign:
|
You must enter one of the listed parts of the command, but not both.
•
Parts of a command in angle brackets show the text that you must
type. Do not type the angle brackets. For example: