As a result, the reading may show 0 volts when
the outlet actually has voltage on it. Make sure
the probe tips are touching the metal contacts
inside the outlet before assuming that no
voltage is present.
CAUTION: Do not measure AC voltages if a motor
on the circuit is being switched ON or OFF. Large
voltage surges may occur that can damage the
meter.
1. Set the function switch to the V AC position.
(“V” will appear in the display).
2. Insert the black test lead banana plug into
the negative (COM) jack and the red test lead
banana plug into the positive (V) jack.
3. Touch the test probe tips to the circuit
under test.
4. Read the voltage in the display. The display
will indicate the proper decimal point and
value.
10
Measurement
Method
