6
Measurement
Method
Measurement Method.
WARNING:
Risk of electrocution. High-voltage
circuits, both AC and DC, are very dangerous and
should be measured with great care.
1.ALWAYS turn the function switch to the OFF
position when the meter is not in use. This meter
has Auto OFF that automatically shuts the meter
off if 15 minutes elapse between uses.
2.If “OL” appears in the display during a
measurement, the value exceeds the range you
have selected. Change to a higher range.
NOTE: On some low AC and DC voltage ranges,
with the test leads not connected to a device, the
display may show a random, changing reading.
This is normal and is caused by the high-input
sensitivity. The reading will stabilize and give a
proper measurement when connected to a circuit.
