NINOX 640 II/USER MANUAL/09-20/REV1.1
4.2 Physical Interface
4.3 Power Consumption
Unit input power specification is +12V +/- 0.5V with a maximum of 5W power dissipation
when the TEC is disabled. An additional 5W may be required if the full drive to the TEC is
required. This will be dependent on environmental conditions and the TEC temperature set
point. On power up, the peak power due to inrush current will be <12W.
4.4 Mounting to a Microscope
The camera has a standard C-mount that should easily screw onto any microscope port.
4.5 Mounting to a Tripod or Optical Table
The camera has a ¼-20 BSW (Whitworth) threaded hole to mount to a tripod or an optical
table.
1.
4 Pin Hirose Connector
2.
SDR Camera Link Connector
3.
SMA Connector: Trigger OUT
Single ended, source impedance =
51Ω, capable of sinking and
sourcing 32mA and will have an
output voltage of 3.3V i.e. TTL
compatible.
4.
SMA Connector: Trigger IN
Single ended, termination
impedance = 510Ω, capacitive load
= 200pF [TTL compatible].
5.
Liquid cooling IN/OUT valve
coupling (x2 IN/OUT)
1
2
3
4
5
