NINOX 640 II/USER MANUAL/09-20/REV1.1
Under
“Available Devices”,
select
“Raptor Falcon III Camera”
from the
“RaptorEPIX”
folder.
After selecting Ninox 640 (Ninox 640 & Ninox 640 II use the same option), a pop up window
will appear with the device and property values stated in Figure 23. Click
“Ok”.
Under
“Installed Devices”,
the Falcon III will now be listed (Figure 24). If the software froze
on the last stage or an error occurs and the camera is not listed under the installed devices
section, then there is an issue with the camera connection, either with the Camera Link or
power connection.
Figure 22: Available Devices.
Figure 23: Device and Property Values.
