Raptor Photonics Ninox 1280, User Manual

Page: 6 / 22

6
4.2 Physical Interface
4.3 Mounting to Microscope
The Ninox 1280 has a standard C-Mount that should easily screw onto any microscope port.
4.4 Mounting to a tripod or optical table
The camera has a ¼-20 BSW (Whitworth), threaded hole to mount to a tripod or an optical table.
5. SOFTWARE COMPATIBILITY
5.1 Compatibility Table
XCAP XCLIB NI Labview Micromanager
Hawk 252
 
Falcon III
 
Eagle
   
Owl 320 High Speed
 
Owl 'Mini'
   
Owl 640
   
Ninox 640
   
Owl 1280
  
NINOX 1280
  
2
3
4
5
1
6
1. 4 Pin Hirose Connector
2. SDR Camera Link Connector
3. SDR Camera Link Connector
4. SMA Connector: Trigger OUT
Single ended, source impedance =
51Ω, capable of sinking and
sourcing 32mA and will have an
output voltage of 3.3V i.e. TTL
compatible.
5. SMA Connector: Trigger IN
Single ended, termination
impedance = 510Ω, capacitive load
= 200pF [TTL compatible].
6. Liquid cooling IN/OUT valve
coupling (x2 IN/OUT)

- Software tested by Raptor Photonics

- Software tested by other companies
Blank - The camera has not been tested or is not supported by this software