DSD Native Playback
②
Follow "Change DAC mode" on page 23 to switch the output
device for the volumio playback option to RAPNAS USB-DAC.
Preparation is completed when the following figure is
displayed in the OLED.
• In the case of performing native playback of DSD in Volumio, two preparations are required beforehand. Work should be
done with playback stopped.
USB conversion
cable B
①
Connect the rear panel DAC - IN and USB expansion port with
the included USB conversion cable B.
( U S B - D A C M o d e )
- -
S T O P - -
1 0 0 %
Afterwards, it is only selecting and playing the sound source of
DSD format with volumio.
During DSD playback, the OLDE will display as shown below.
[ D S D - 2 ]
1 1 . 2 8 M H z
0 : 3 2 > 5 : 0 8
1 0 0 %
