4. Insert the tip of the wire into wire guide C,
through the gap of the feeding gears and
all the way into the pipe (10-20 mm).
If the window is dirty and it is difficult to
determine the position of the Wire Guide C,
clean the inside of the window with a soft
cloth. Close the window again to prevent the
ingress of foreign bodies in the machine.
5. Push the release stopper and make sure
that the release lever is back in original
position, and that the feeding gears are
clamping the wire.
Feeding gears
Release lever
Release stopper
4. Machine Operation
Always read, understand and comply with
safety instructions (Section 2) before use.
Battery Saving Function
The machine is equipped with a battery
saving function and will automatically shut
down after 10 minutes of no use.
Tie Tension Settings
Use the adjusting knob to set tie tension at
desire level (1=min tension / 10=max tension).
Loading Wire Coil
Warning - Ensure trigger lock is on, power is
switched off and battery removed.
Release lever
Release stopper
Reel stopper
Reel stay
1. Push the release lever until it is caught by
the release stopper.
2. Push the reel stopper to open the reel stay.
10-20mm
Pipe
Wire guide C
3. Insert the wire coil with the wire-end
upwards and forward. Carefully close the
reel stay and secure the reel stopper.