12
Attaching the Driver to the LEDs
The BC8 hood has enough room inside of it for a small driver such as an LPC-35-700. Getting the
driver inside of the hood is easy. Just run the ACL and ACN wires through one of the original wire ports
and then solder V+ from the driver to the + terminal of the 1
st
LED in your string and V- from the driver
to – on the last LED in your string.
After routing the AC wires, solder V+ to + on the first LED in the string and V- to – on the last LED in the
string and tuck the wires in nicely:
