8
Wiring the LED String(s)
*****
NEVER APPLY POWER TO THE LED DRIVER BEFORE ALL WIRING IS COMPLETE
*****
Wiring the LEDs is done as a string in series. The string is a series circuit wired + to – (or – to +,
depending on where you start) starting from one wire on the driver, from LED to LED, to the other wire
on the driver.
Below is a photograph of all 9 LEDs wired together, + to – all the way around. Again, do NOT
power the driver until the wiring is complete. You risk burning out your LEDs, a very expensive mistake.
You may have a separate driver for blue and white LEDs. If you do, make sure you attach at least the
minimum number of LEDs for the particular model driver you have.