34
GB
Stapling
Stapling is performed as follows:
1
Check that the lever (K) is adjusted for the correct stapling depth.
2
Connect the machine to the electrical supply. The warning light (H) will
show green.
Warning:
Only the stapling object is allowed to be placed under
the visor.
3
Move the stapling object forward to the stapling position so that the
trigger is pushed in.
4
Disconnect the machine from the electrical supply when the stapling is
performed.
MAINTENANCE
Checking safety functions
One of the safety checks that should be done every day before the machine
is used is to check on the visor’s safety function.
Check the visor’s safety switch as follows:
1
Connect the machine to the electrical supply.
2
Remove the visor by pressing its knob.
3
Test whether or not the machine will staple a piece of paper with the visor
removed.
If the machine operates without the visor it must be disconnected
immediately and sent for repair.
Cleaning
The machine should be cleaned when required as follows:
1
Remove the adapter by disconnecting its cables..
2
Clean the machine as required by blowing away dust and paper
remnants.
3
If the machine is heavily soiled it should be cleaned with a moist rag.
4
If there are loose staples in the machine, lift it up and turn it in different
positions when shaking it. The staples will fall out through the holes in the
bottom of the machine.
Inlaga00AA
00-06-06, 11.26
34