Rapid Engineering BH-40, Installation, Operation & Service Manual

Page: 20 / 68

BH-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
14 of 59
SECTION 6: HEATER INSTALLATION
To ens u re yo u r safety and comply w ith the terms of
the w arranty, all u nits m u st b e installed in
accordance w ith these instr u ctions.
The gas or the electrical s u pply lines m u st not b e
u sed to s u pport the heater.
Do not locate the gas or electric s u pply lines directly
o v er the path of the fl u e prod u cts from the heater.
The heater m u st b e installed in a location that it is
readily accessi b le for ser v icing.
The heaters m u st b e installed in accordance w ith
clearances to com bu sti b les as indicated on the rating
plate and in this instr u ction man u al.
The minim u m and maxim u m gas inlet press u res
m u st b e maintained as indicated on the rating plate.
Typical installation config u rations are sho w n on
Page 15, Figure 14 .
Expansion and contraction of the t ub e dictates that
the minim u m s u spension lengths m u st b e
maintained. See table on Page 15, Figure 14 .
WARNING
Severe Injury Hazard
Secure burner to burner tube with bolts and
lockwashers.
Hang heater with materials with a minimum
working load of 75 lbs (33 kg).
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.