S
ERIES
2000 I
NSTALLATION
, O
PERATION
AND
S
ERVICE
M
ANUAL
24
SECTION 11: INLET HOOD
Inlet hoods are shipped
u
nassembled and m
u
st be assembled prior to installation. The inlet hood may be
installed either onto the inlet of the air handler or to an o
u
tside
w
all. After installing an inlet hood, all hard
w
are
m
u
st be torq
u
ed according to recommended specifications on
Page 6, Table 1
. In addition, all seams m
u
st
be ca
u
lked (pro
v
ided by others).
NOTE:
Check to be s
u
re that all req
u
ired components are present. If any are missing, contact yo
u
r RAPID
®
independent distrib
u
tor.
Crush Hazard
Use proper lifting
equipment and
practices.
Falling Hazard
Use proper safety
equipment and prac-
tices to avoid falling.
Severe Injury Hazard
Use proper lifting
practices and equip-
ment.
Equipment and
accessories are
heavy.
Cut/Pinch Hazard
Wear protective gear
during installation,
operation and
service.
Edges are sharp.
WARNING
Failure to follow these instructions can result in death, injury or property damage.
