4
3.6V Cordless Screwdriver
Congratulations!
On the purchase of your power tool. Your tool will perform to your
satisfaction for a long time if handled in accordance with our Safety
and Operating Instructions.
Save this manual for future reference
Technical data
Tool
3.6V Cordless Screwdriver
Model code
1640
Input voltage
3.6V DC
Driver bit size
1/4" hex
Maximum torque
4Nm
Revolution speed (no load)
230rpm
Vibration emission level*
0.369m/s² K:1.5m/s²
Sound pressure level
55dB(A) K=3.0dB(A)
Sound power level
66dB(A) K=3.0dB(A)
Weight 370g
Battery
Battery type
Lithium-ion
Voltage VDC
3.6V
Capacity 1.5Ah
Charger
Charging time
3-5 hours
Mains voltage/input VAC
100-240V
Weight
18g
* The declared vibration emission level represents the main
applications of the tools. However, if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase
exposure level over the total working period.
Declaration of Conformity
This power tool has been designed in compliance with the
Regulations and Standards of the European Directives and UK
Conformity Assessed standards.
WARNING! Before use carefully read and understand
all instructions.
Failure to do so could result in electric shock,
fire and/or serious personal injury. The term “power tool” in all of the
warnings listed below refers to your battery-operated cordless 3.6V
screwdriver. For any queries relating to safety matters on this power
tool, please email
Unpacking
• Carefully remove the power tool and accessories from the
outer packaging.
• Inspect the power tool carefully to make sure no breakage or
damage occurred during transit.
• If any parts are damaged or missing, please email
for assistance. Do not operate this power
tool until the missing or damaged parts are replaced. Failure to do
so could result in a personal injury.
• Whilst every effort has been made to ensure accuracy of
information contained within this manual, our policy is one of
continuous improvement to our products and as such we reserve
the right to change the product specification without prior notice.
General Safety Instructions
Important.
This power tool should not be modified or used for
any application other than that for which it was designed. Any such
alteration or modification is misuse and could result in a hazardous
condition leading to a personal injury. If you are unsure of its relative
applications do not hesitate to contact us and we will advise you.
Work Area
•
Keep your work area clean and well lit.
Cluttered benches and
dark areas invite accidents.
•
Keep children and pets away.
All visitors should be kept at a
safe distance from the work area.
•
Avoid dangerous environments.
Do not use power tools in damp
or wet locations or expose them to rain. Provide adequate space
surrounding the work area. Do not use in environments with a
potentially explosive atmosphere, such as in the presence of
flammable liquids, gases or dust; power tools will create sparks
which may ignite the dust or fumes.
•
Secure work.
Use clamps or a vice to hold work. This frees both
hands to operate the power tool.
Personal Safety
•
Stay alert.
Always watch what you are doing and use common
sense. Do not operate a power tool when you are tired or under
the influence of medication, alcohol or drugs.
•
Wear proper clothing.
Do not wear loose clothing or
jewellery that can catch in moving parts. Non-slip footwear is
recommended. Contain long hair and roll long sleeves up above
the elbow.
•
Do not overreach or use on unstable surfaces.
Keep proper
footing and balance at all times.
•
Use safety equipment.
Dust mask, non-skid safety shoes,
hard hat, and hearing protection must be used for appropriate
conditions. Wear CE approved safety goggles at all times. Normal
spectacles only have impact resistant lenses; they are NOT
safety googles.
Electrical Safety
•
Ensure the rotation direction switch (6) is in the centre
‘lock’ position and USB cable removed,
when not in use,
before storing the power tool, before servicing or when changing
accessories such as driver bits etc.
•
Do not expose power tool to rain or wet conditions.
•
Power tool plugs must match the outlet.
Do not use any
adaptor plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
•
Protect yourself from electric shock.
When working with power
tools, avoid contact with any earthed or grounded surfaces such
as pipes, radiators, hobs and refrigerators.
•
Do not abuse the USB cord.
Never carry the tool by the charging
cable or pull the cable with force from the socket. Keep the USB
cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords may create a fire or increase the risk of
electric shock.
Power Tool Use and Care
•
Do not force the power tool.
Use the correct power tool for your
application. It will do the job better and safer at the rate for which
