Ransomes Spider I Safety, Operation & Maintenance Manual Download Page 8

Operation manual - Spider ILD01 

 

8 / 54   

 

 

 

rev. 07-01-01-2010 

3 SAFETY INSTRUCTIONS 

This safety symbol indicates important 
safety messages in this manual. When you 
see this symbol, be alert to the possibility of 
injury, carefully read the message that 

follows, and inform other operators. 

 

Safety Checks

 

 

Do not enter or reach under the machine if it is 
lifted and not sufficiently supported. The machine 
should be supported on places marked by the 
symbol of a lifting jack. 

 

 

The mower should only by transported in a 
container or on a trailer. 

 

 

Check bolt torques at regular intervals. The first 
check should be done after 8 operating hours. 
Pay attention to the attachment of the cutting 
blade and the proper bolt torque. Use a torque 
wrench and a specified torque. See 11.21.  

 

 

The attaching flange of the blades or the bolts 
must not show sign of damage or wear. The bolts 
must be complete. The blade must be 
undamaged, evenly worn and adequately sharp. 

 

 

If you are driving the machine outside the 
working area, always turf off the mowing blade 
and set the maximum mowing height, otherwise 
the blade may get damaged. 

 

 

Keep the product clean after use. Do not use 
gasoline or similar oil products for cleaning. 

 

 

Do not reach into the space under the mower 
with your hands of feet. Do not reach under the 
engine cover or into the gear mechanism. 

 

 

If you are forced to reach under the machine, wait 
until all rotating parts stop. Attention, it takes 
some time before blade runs down! The run-
down time depends on the state and wear of the 
brake/clutch. Have the brake checked at regular 
intervals at an authorised servicing facility. 

 

 

While operating, wear closed shoes and work 
clothing. Do not wear loose clothes that could get 
caught by the machine, short trousers or light 
shoes. 

 

 

It is strictly prohibited for the operator to wear 
loose clothing.

 

 

A local risk assessment should determine the 
need for a face shield.

 

 

Do not operate the machine after drinking alcohol 
or using medication influencing perception. 

 

 

Before starting the engine, make sure that the 
mower blade is disengaged. If the blade switch 
is in the ON position, the machine cannot be 
started. When engaging the mower blade, step 
aside far enough to be protected against object 
accidentally thrown from the mower and to be 
able to stop the mower in case of an 
emergency. Do not enter the path of the mower. 

 

 

While operating the mower make sure that the 
mower is clearly visible at all times and within 
the range of the remote control unit and that 
you can clearly recognize dangerous situations 
and react to them properly. Do not abuse the 
maximum reach of the remote control. 

 

 

When using the mower, follow all general work 
safety regulations.

 

 

Work with the mower may only be started if the 
mower is not damaged by previous operation. 

 

 

Do not change the engine tuning, especially the 
engine speed regulator. Do not modiy the 
exhaust pipe.  

 

Do not use the mower if there is less than 30% 
of fuel in the fuel tank. 

 

Do not move the mower by means of  towing it  
behind another machines.  

 

 

Operating Environment

 

 

The machine should only be used by persons 
over 18 years of age, who have been 
acquainted with the machine and the user’s 
manual .The remote control (further referred to 
as ”RC”) is considered a part of the machine

 

 

The user’s manual must be stored in a place 
permanently accessible to the operator and 
must be available to him at all times.  

 

Do not allow children or unauthorised persons 
use the product.  

 

Before starting to operate the machine, you 
have to be familiar with all the symbols next to 
the controls and indicators used on the mower 
and the RC. 

 

Pay special attention to the stopping and 
shutting-off of the engine and to the emergency 
shutting-off of the mower. 

 

Before using the mower on a slope, make sure 
you test and practice your mower-control skills 
on flat and level ground, which is sufficiently free 
and spacious.

 Master how to control the 

movement on a surface, to mow around bushes, 
trees and other terrain elements and obstacles. 

 

When operating the mower on slope, make sure 
that the engine revolutions are set to maximum 
speed. If you stop the mower on a slope, position 
the wheels across the slope.   

 

While operating or transporting the mower, the 
operator must always have the mower in their 
view. The maximum distance between the 
operator and the mower is  50 m (164 ft). 

 

While using the mower follow all safety 
regulations given in this manual and respect 
local regulations and provisions concerning 
noise-emissions, especially when using in 
hospitals, spas and other sensitive areas.  

 

The operator must pay attention to the area into 
which the mulched grass may be blown. Neither 
the operator, not any other persons, children or 
animals should be allowed to enter this area. If 
mowing uneven terrain the ejection and throwing 

 

Summary of Contents for Spider I























































Reviews: