Operation manual - Spider ILD01
35 / 54
rev. 07-01-01-2010
11 MAINTENANCE AND LUBRICATION
11.1
MAINTENANCE CAHRT - MOWER
Machine Maintenance Plan
Period according to the state of the operating hours (OH) counter
X = Operator
Daily before
operating
Every
50 OH
Every
200 OH
Every
800 OH
Visually check for oil leakage from engine and
hydraulic systems
x
x
Grease all sliding bars (at least once a season)
x
Lubricate other lubrication points with dry lubricant in
a spray
x
x
Check the level of hydraulic oil in tank
x
x
Check the tyre pressure
x
x
Visually check the tension of travel V-belts
x
x
Visually check the tension of the steering chain
x
x
Check the remote control battery state of charge
x
Check the mower battery state of charge
x
Check electronic and safety devices (emergency stop,
steering, signal etc.)
x
x
Check screw and nuts tightening (visually check daily)
x
Check blade sharpness and deformation
x
x
Check the blade bolts tightening
x
Change the hydraulic oil
x
Change the hydraulics filter
(Ecological oil - first exchange after 200 OH)
x
Rinse the fuel tank, change the breather filter
x
Change the fuel filter (change more often on extremely
dusty or dirty conditions)
x
Clean cooling systems (engine, hydraulic pump)
x
Visually check hydraulic hoses, fuel hoses, cables –
replace if necessary
x
Check and adjust wheel geometry
x
Adjust t he ne utral pos ition of t he m achine dr ive
(hydraulic pump)
x
Check, ad just an d t ighten ch ains i n t he wheel
suspensions
x
Adjust the blade deceleration
x
Check d rive b elts an d m owing m echanism b elts –
replace if necessary
x
Check an d cl ean t he mowing mechanism g ear ( belts,
pulleys, belts pulleys)
x
Check safety decals on the machine
x
Check the mowing device bearings
x
Check the blade hub
x
