QUICK START GUIDE
en-15
the button is held. If held for one second the
unit increases at a rate of three units per
second. Pressing the check mark will move
the line to the next unit to be adjusted. If at
the end it will move to the time or date.
Pressing button one (exit) will, if no unit is
selected return to the previous menu or if a
unit is selected return to start of this page.
SERVICE MENU
The check mark can be moved up and down
using buttons two and three. Button four then
enters the selected page. Button one returns
to the main menu. There are three options
within this menu.
Fault Log
Time to Service
Diagnostics
A service engineer can reset the time to
service.
The part numbers for service items are
stored within the memory, only numerical
digits are stored.
The first service is at 50 hours, after the first
service the interval is 250 hours.
DATA LOGGING MENU
The last 50 “Faults” that the controller finds
are recorded. When 50 faults are recorded,
the next fault that occurs will overwrite the
oldest fault.
This information is retrieved using the
service tool, or can be seen on the errors
page of the service menu. The same method
of navigating pages applies, the errors scroll
with the last error always at the top of the
screen.
The fault / data record function has three
actions. Each record can contain a
maximum of 50 faults. These are as follows
Inclinometer records the slopes greater than
22°.
Engine records the engine shutdowns
caused by overheat or loss of oil pressure.
Service records hydraulic by-pass and
missed service intervals.
Service Menu
FAULT
LOG
TIME
TO
SERVICE
Diagnostics
Service required in 10 Hours
Parts required for routine service
1234 Fuel
Filter
1235 Air
Filter
1236
Engine Oil Filter
1237 Hydraulic
Filter
12/05/2008
13/05/2008
18/05/2008
22/06/2008
22/06/2008
VISUAL DISPLAY
