QUICK START GUIDE
en-14
SLOPE WARNING SCREENS
NOTE
The slope warning screens will only become
visible when the TST is installed.
During work, if the machine is driven onto a
slope of more than 16º the screen will display
this warning which over rides all other
information, and will continue until the
machine has been driven to an area of less
than 16º.
If the slope angle reaches 18º, the screen
will display this warning that indicates that
the cutting unit arms are locked in the lower
position. An audible warning will be given,
the buzzer will sound four times every four
seconds and the red LED’s will flash four
times every four seconds. This will continue
until the machine has been driven to an area
of less than 16º.
If the slope angle reaches 22º the screen will
display this warning that indicates that at
22deg the centre and upper unit will be
raised 4"- 6” above the ground to improve
stability and all units stop rotating. An
audible warning will also be given, the
buzzer will sound four times every four
seconds and the red LED’s will flash four
times every four seconds. This continues
until the machine has been driven to an area
of less than 16º.
MAIN MENU
The check mark is moved up and down
using buttons two and three, button four then
enters the selected page. Button one returns
to the main menu. There will be three options
within this menu.
Clock, Service and Language.
CLOCK AND DATE ADJUST
The Check mark can be moved up and down
to select the date or time. When you press
button four (check mark) a line appears
under the unit to be adjusted. The arrows will
adjust that unit, by 1 unit per press, unless
15
16°
15
18°
15
22°
Main Menu
CLOCK
SERVICE
LANGUAGE
Clock Settings
DATE
-
21/06/2008
TIME
-
16:08
VISUAL DISPLAY
