QUICK START GUIDE
en-12
The display is activated when the ignition is
turned on.
START UP SCREEN
When first turned on,this screen is shown.
The hour meter shows total engine hours.
WARNING/SERVICE SCREEN
After the start up screen, the warning screen
is shown.
If the machine is within 5 hours of the next
service interval, a warning is shown. An
operator input is needed to continue to the
main screen for operation. Otherwise the
main run screen appears. If a fault condition
has occurred during the previous start, a pop
up screen over the top of the warning screen
shows the fault. The operator must confirm
the fault, to continue to the main screen.
START UP SLOPE WARNING SCREEN
When the ignition switch is turned to crank
one of the following screens will be shown.
If the machine is fitted with the slope
monitoring system the screen will display the
logo “TST™” (Tilt Sensor Technology) and
maximum working slope symbol. On the left
hand side of the screen the glow plug symbol
and a count down will be shown to indicate
the time left before the engine will
automatically crank.
If the machine is not fitted with the slope
monitoring system TST™ the screen will
display the logo crossed out and maximum
working slope symbol. On the left hand side
of the screen the glow plug symbol and a
count down will be shown to indicate the time
left before the engine will automatically
crank.
1234.5
WARNING
If incorrectly used this machine can cause
severe injury. Those who use and maintain
this machine should be trained in its proper
use, warned of its dangers and should read
the entire operators manual before attempting
to set up, operate, adjust or service the
machine.
VISUAL DISPLAY
18°
MAX
15°
MAX
5
5
TST
TST
