en-88
12 QUALITY OF CUT
12.3
STEP CUTTING _____________________________________________________
NOTE: Arrow indicates direction of travel.
Step cutting occurs when grass is cut taller on one
side of a reel than the other or one cutting unit to an-
other. This is usually caused by mechanical wear or
an incorrect roller or HOC (height-of-cut) adjust-
ment.
Probable Cause
Remedy
HOC (height-of-cut) settings are different from one
side of a reel to the other or from one cutting unit to
another.
Check HOC adjustment of cutting units.
Worn front roller bearings.
Check/replace front roller bearings.
Reel-to-bedknife contact is different from one side of
the cutting unit to the other or from one cutting unit
to another.
Check reel-to-bedknife contact.
Cutting reel movement is restricted.
Check/remove cutting reel movement obstruction.
Variations in turf density.
Change mowing direction.
Machine weight distribution is uneven.
Check/adjust tire inflation pressure.
TN0221
Summary of Contents for Highway3
Page 16: ...en 14 3 SAFETY NOTES...
Page 27: ...en 25 SPECIFICATIONS 4 NOTES...
Page 86: ...en 84 10 ACCESSORIES NOTES...
Page 99: ......
