en-87
12 QUALITY OF CUT
12.2
MARCELLING______________________________________________________
NOTE: Arrow indicates direction of travel.
Marcelling, like washboarding, is a cyclical pattern
of varying cutting heights, resulting in a wave-like cut
appearance. In most cases, the wave tip-to-tip dis-
tance is 2 in. (5 cm) or less.
Probable Cause
Remedy
Mowing (ground) speed is too fast.
Reduce mowing (ground) speed.
HOC (height-of-cut) setting is too low for turf condi-
tions.
Check/adjust HOC to turf conditions.
Cutting reel diameter is worn.
Check cutting reel diameter and replace if worn.
TN0220
Summary of Contents for Highway3
Page 16: ...en 14 3 SAFETY NOTES...
Page 27: ...en 25 SPECIFICATIONS 4 NOTES...
Page 86: ...en 84 10 ACCESSORIES NOTES...
Page 99: ......
