AH-16-02.1
32
RansFlex Applicators
-
MAINTENANCE
10. Install Bellville washers in sequence shown.
11. Install rear nut. Install jam nuts finger tight.
12. Set air before fluid adjustment.
13. Tighten jam nuts.
Re-Install Needle Shaft Into Barrel
1. Install needle shaft into barrel with die-electric
grease.
2. Tighten packing using wrench. Pull back and
forth on the needle shaft till a slight amount of
drag is felt.
0
3. Squeeze approximately
1/3 tube of LSCH0009-00
dielectric grease in the
cascade pocket.
