5
1.2.7 Driving Safety
1.
Do
not
take
the
key
off
while
driving.
2.
Sudden
start
or
stop,
sudden
turn,
too
fast
or
a
"Z"
shaped
route
is
very
dangerous.
3.
When
an
abnormal
situation
occurs
(such
as
noise,
vibration,
smell,
the
dashboard
is
not
normal),
immediately
open
the
machine
to
a
safe
place
for
inspection.
4.
Do
not
use
any
joystick
while
the
machine
is
in
motion.
If
you
need
to
do
this,
start
slowly.
5.
If
you
need
to
drive
on
rough
terrain,
use
low
speed
and
don't
turn.
6.
Try
to
avoid
pressing
from
the
object.
If
it
is
necessary,
please
approach
the
working
arm
and
drive
at
low
speed.
The
machine
inclination
is
≤5
°
7.
Be
careful
when
driving
on
a
slope
to
avoid
tipping
or
sliding.
8.
Keep
the
fork
(or
other
attachment
on
the
arm)
8-12 inches
from
the
ground
and
quickly
lower
and
stop
the
machine
in
an
emergency.
9.
Avoid
steering
or
lateral
travel
on
the
slopes,
only
on
level
roads.
10.
If
the
engine
is
off
on
a
slope,
emergency
braking
should
be
used
and
the
working
arm
should
be
lowered.
11.
If
the
engine
is
off
on
a
slope,
emergency
braking
should
be
used
and
the
working
arm
should
be
lowered.
1.2.8 Safe Transportation
1. The machine can be transported by truck or similar trailer. Check the transport for near load
before loading. The platform of the vehicle must be level to prevent movement during
transportation.
2.The loading and unloading of the machine can be done by a suitable loading plate, ensuring
that the loading plate is strong enough to be reinforced with the relevant items if necessary. Slowly
open the loading plate and keep the machine in the middle of the loading plate. The inclination of the
loading plate must not exceed 20°.
3.The loading and unloading truck must be carried out on a flat road surface, avoiding it at the
edge of the ditch or on the side of the road.
4.After loading, use the brake block and handbrake to stop. Fixed holes (two in front and rear) have
been designed on the machine to secure the machine with ropes or chains.
5.After the end of the transport, it is recommended to check whether the machine is in a safe position,
whether the brake block is activated, and then unload the vehicle before unfastening the fixed rope.
