20
25
°.If
the
outside
temperature
is
below
zero
and
the
radiator
is
not
equipped
with
antifreeze,
release
the
water
from
the
radiator
and
add
the
appropriate
antifreeze.
5.The
operator
must
stay
in
the
seat
while
the
machine
is
running
.
Note
Before getting off the vehicle, the operator must lower the boom and attachments, stop the machine,
activate the parking brake, and stop the engine to remove the ignition key.
3.4 Turn Off The Machine
Turn off the machine must follow the below instructions:
Make
sure
the
ground
you
want
to
park
on
is
flat
Return
various
control
elements
to
their
original
appearance
Rotate
the
key
to
the
off
position
and
remove
it.
Do
not
leave
while
the
machine
is
running!
Engage
the
hand
brake
to
stop
the
machine
3.5 Hydraulic coupler
The machine is designed with a variety of attachments that can be attached to the quick change
adapter and the quick change adapter is mounted on the front of the boom.
The hydraulic coupler is mounted on the boom. The hydraulic coupler and quick change adapter are
combined with each other.
Note
1.When installing, disassembling or using the attachment, refer to the relevant instructions, lower the
quick-change coupling and stop the engine.
2.Attachment must have relevant protection
3.Please follow the steps below to install the attachment.
Drive
the
machine
to
the
vicinity
of
the
attachment
Slowly
approach
the
attachment
and
turn
the
quick-change
adapter
so
that
the
slope
of
the
quick
change
adapter
plate
is
parallel
to
the
slope
of
the
attachment
plate
H
ook
the
upper
pin
of
the
connecting
plate
to
the
two
joint
points
above
the
attachment.
Gently
lift
the
boom
with
the
pilot
control
lever
and
ensure
that
the
two
pins
are
locked
by
the
three
position
rocker
switch
Connect
the
hydraulic
line
to
the
PTO
quick
coupler
and
follow
the
instructions.
4. Disassemble or replace the attachment, follow the "Accessory Manual"
Note
Do not leave the boom lifted with load, unload it then low down the boom.
Do not use the machine on uneven ground or on slopes
Part 4 Maintenance
4.1 General Instruction
Note
