background image

2.10     STORAGE SAFETY

1.

Store the unit in an area away from human
activity.

2.

Do not permit children to play on or around
the stored machine.

3.

Store the unit in a dry, level area.  Support the
frame with planks if required.

9

2.9     HYDRAULIC SAFETY

1.

Make sure that all the components in the
hydraulic system are kept in good condition
and are clean.

2.

Replace any worn, cut, abraded, flattened or
crimped hoses and metal lines.

3.

Relieve pressure before working on hydraulic
system.

4.

Do not attempt any makeshift repairs to the
hydraulic lines, fittings or hoses by using
tapes, clamps or cements.  The hydraulic
system operates under extremely high-
pressure.  Such repairs will fail suddenly and
create a hazardous and unsafe condition.

5.

Wear proper hand and
eye protection when
searching for a high-
pressure hydraulic leak.
Use a piece of wood or
cardboard as a backstop
instead of hands to
isolate and identify a
leak.

6.

If injured by a concentrated high-pressure
stream of hydraulic fluid, seek medical atten-
tion immediately.  Serious infection or toxic
reaction can develop from hydraulic fluid
piercing the skin surface.

7.

Before applying pressure to the system, make
sure all components are tight and that lines,
hoses and couplings are not damaged.

8.

When disconnecting hydraulic lines, shut off
hydraulic supply and relieve hydraulic pres-
sure.

Summary of Contents for Northstar 11000UNIV

































Reviews: