11. Turn the Splitter over
so the cylinder is on
top.
24
Fig. 14 TURNED
Fig. 15 ATTACHED
12. Attach to the Tractor:
a.
Slide the lift arms
over the mounting
pins and install the
retainers.
b.
Connect the top
link and install the
retainer.
c.
Level the frame
using the lift arm
and the turnbuckle
in the top link.
d.
Connect the
hydraulics.
• Use a clean cloth
or paper towel to
clean the tips on
the end of the
hoses and the
area around the couplers on the tractor.
• Insert the male ends into the couplers on
the tractor. Be sure they are locked in
place.
• Route the hoses over the hitch and
secure in position with clips, tape or
plastic ties. Provide sufficient slack for
raising.
WARNING
Use extreme care when working
around a high-pressure hydraulic
system. Make sure all connec-
tions are tight and all components
are in good repair. Wear hand
and eye protection when search-
ing for suspected leaks.