21
12. Operating Hints:
a.
Hold the hydraulic lever
in the wedge extend
direction until the wedge
reaches the base or the
log/wood splits. Move it
into detent in the oppo-
site direction to retract
the wedge. The lever
will kick out of detent
when it is fully retracted.
b.
In cool or cold operating
conditions, the oil can be
so viscous that the
detent will not work in the
retract wedge mode.
The system will kick out
of detent when the back
pressure exceeds more
than 200 psi. Warm the
oil by holding the control
lever over relief for a few
minutes. As the oil
circulates, it will warm
the system and the
detent will function
normally.
c.
Always keep the working
area neat and clean to
prevent tripping. Pile the
split and unsplit wood in
piles close to the working
area. Do not allow
pieces to pile up and
clutter the area. A
cluttered working area
can lead to tripping and
an accident. Do not take
chances with safety.
Fig. 9 WORK PLACE
Vertical
Horizontal
d.
Do not place the splitter on muddy, icy,
wet or cluttered surfaces. Each can lead
to slipping or tripping and cause acci-
dents.
e.
Lubricate the plate under the wedge slider
each time the machine is used to improve
wear and reduce friction and/or binding.