14
4.5 FIELD OPERATION
Log Splitters attach to a tractor 3 point hitch and
use the tractor hydraulics to move a wedge
through wood to split it. The splitter can be used
in the vertical or horizontal configuration. How-
ever the operator has the responsibility of being
familiar with all operating and safety procedures
and following them.
Each operator should review this section of the
manual at the start of the season and as often as
required to be familiar with the machine. When
using, follow this procedure:
1.
Review and follow the Pre-Operation Check-
list.
OPERATING SAFETY
1.
Read and understand the Operator’s Manual
and all safety signs before operating, servic-
ing, adjusting, repairing or unplugging.
2.
Do not allow riders.
3.
Install and secure all guards and shields
before starting or operating.
4.
Keep hands, feet, hair and clothing away
from moving parts.
5.
Place all controls in neutral, stop tractor
engine, set park brake, remove ignition key
and wait for all moving parts to stop before
servicing, adjusting, repairing or unplugging.
6.
Place all tractor and machine controls in
neutral before starting.
7.
Always wear the appropriate personal safety
equipment when operating splitter including
but not limited to hard hat, safety shoes, face
shield and heavy gloves.
8.
Clear the area of bystanders, especially
small children, before starting.
9.
Do not operate on slopes or sidehills.
10. Keep working area clean, neat and dry to
prevent slipping and tripping.
11. Keep all mechanical and hydraulic compo-
nents in good condition. Do not operate with
leaks or damaged components.
12. Load splitter by holding logs on the side
rather than the top and bottom.
13. Do not split wood across the grain.
14. Review safety instructions with all operators
annually.